Centre for Intelligent Transport

Publications

   2018   |   2017   |   2016   |   2015   |   2014   |   2013   |   2012   |   2011   |   2010   |   2009   |   2008   
  • Wen PH, Hon YC, Li M and Korakianitis T (2013). Finite integration method for partial differential equations. Applied Mathematical Modelling vol. 37 (24), 10092-10106.  
    15-12-2013
  • Faranosov GA, Goloviznin VM, Karabasov SA, Kondakov VG, Kopiev VF and Zaitsev MA (2013). CABARET method on unstructured hexahedral grids for jet noise computation. Computers and Fluids vol. 88, 165-179.  
    15-12-2013
  • Hosseini G, Williams JJR, Avital EJ, Munjiza A, Dong X and Green JSA (2013). Simulation of the upper urinary system. Critical Reviews in Biomedical Engineering vol. 41 (3), 259-268.  
    01-12-2013
  • Nobakht AY, Shahsavan M and Paykani A (2013). Numerical Study of Diodicity Mechanism in Different Tesla-Type Microvalves. Universidad Nacional Autonoma De Mexico Journal of Applied Research and Technology vol. 11 (6), 876-885.  
    01-12-2013
  • Vepa R (2013). Dynamic Modelling, Simulation and Control of Energy Generation. Springer  
    01-12-2013
  • Trovato G, Zecca M, Sessa S, Jamone L, Ham J, Hashimoto K and Takanishi A (2013). Cross-cultural study on human-robot greeting interaction: acceptance and discomfort by Egyptians and Japanese. De Gruyter Paladyn Journal of Behavioral Robotics vol. 4 (2), 83-93.  
    01-12-2013
  • Li M, Chen CS, Hon YC and Wen PH (2013). Finite integration method for solving multi-dimensional partial differential equations. Elsevier Inc. Applied Mathematical Modelling 
    16-11-2013
  • Semiletov VA and Karabasov SA (2013). CABARET scheme with conservation-flux asynchronous time-stepping for nonlinear aeroacoustics problems. Journal of Computational Physics vol. 253, 157-165.  
    15-11-2013
  • Gilkeson CA, Toropov VV, Thompson HM, Wilson MCT, Foxley NA and Gaskell PH (2013). Multi-objective aerodynamic shape optimization of small livestock trailers. Engineering Optimization vol. 45 (11), 1309-1330.  
    01-11-2013
  • Kakaee A-H and Paykani A (2013). Research and development of natural-gas fueled engines in Iran. Elsevier Renewable and Sustainable Energy Reviews vol. 26, 805-821.  
    01-10-2013
  • Khatir Z, Thompson H, Kapur N, Toropov V and Paton J (2013). Multi-objective Computational Fluid Dynamics (CFD) design optimisation in commercial bread-baking. Applied Thermal Engineering vol. 60 (1-2), 480-486.  
    01-10-2013
  • Liu D and Toropov VV (2013). A lamination parameter-based strategy for solving an integer-continuous problem arising in composite optimization. Computers and Structures vol. 128, 170-174.  
    23-09-2013
  • Semiletov VA, Karabasov SA, Lyubimov DA, Faranosov GA and Kopiev VF (2013). On the effect of flap deflection on jet flow for a jet-pylon-wing configuration: Near-field and acoustic modelling results. 19th Aiaa/Ceas Aeroacoustics Conference 
    16-09-2013
  • Kondakov VG, Karabasov SA and Goloviznin VM (2013). On the effect of Mach number on subsonic jet noise sources in the Goldstein acoustic analogy model. 19th Aiaa/Ceas Aeroacoustics Conference 
    16-09-2013
  • Semiletov VA and Karabasov SA (2013). 3D frequency-domain linearised Euler solver based on the Goldstein acoustic analogy equations for the study of non-uniform mean flow propagation effects. 19th Aiaa/Ceas Aeroacoustics Conference 
    16-09-2013
  • Liu H, Sangpradit K, Li M, Dasgupta P, Althoefer K and Seneviratne LD (2013). Inverse finite-element modeling for tissue parameter identification using a rolling indentation probe. Springer Nature Medical & Biological Engineering & Computing vol. 52 (1), 17-28.  
    15-09-2013
  • Song X, Liu H, Althoefer K, Nanayakkara T and Seneviratne LD (2013). Efficient Break-Away Friction Ratio and Slip Prediction Based on Haptic Surface Exploration. Institute of Electrical and Electronics Engineers (Ieee) Ieee Transactions On Robotics vol. 30 (1), 203-219.  
    11-09-2013
  • Doulgeris G, Korakianitis T, AVITAL E, Pilidis P and Laskaridis P (2013). Effect of jet noise reduction on gas turbine engine efficiency., Editors: Martinez-Val R. Institution of Mechanical Engineers Proc Imeche Part G: J Aerospace Engineering vol. 227 (9), 1441-1455.  
    01-09-2013
  • Liu T, Wadley HNG and Deshpande VS (2013). Dynamic compression of foam supported plates impacted by high velocity soil. Elsevier International Journal of Impact Engineering vol. 63, 88-105.  
    19-08-2013
  • Dharmasena KP, Wadley HNG, Liu T and Deshpande VS (2013). The dynamic response of edge clamped plates loaded by spherically expanding sand shells. Elsevier International Journal of Impact Engineering vol. 62, 182-195.  
    12-08-2013
  • Hasan MR, Vepa R, Shaheed H and Huijberts H (2013). Modelling and control of the barrett hand for grasping. Proceedings - Uksim 15th International Conference On Computer Modelling and Simulation, Uksim 2013, 230-235.  
    05-08-2013
  • Qin Y, Zhang K, Li J and Dai JS (2013). Modelling and analysis of a rigid–compliant parallel mechanism. Elsevier Robotics and Computer-Integrated Manufacturing vol. 29 (4), 33-40.  
    01-08-2013
  • Cagney N and Balabani S (2013). Mode competition in streamwise-only vortex induced vibrations. Elsevier Journal of Fluids and Structures vol. 41, 156-165.  
    01-08-2013
  • Xu D, Kaliviotis E, Munjiza A, Avital E, Ji C and Williams J (2013). Large scale simulation of red blood cell aggregation in shear flows., Editors: Guilak F. Elsevier Journal of Biomechanics vol. 46 (11), 1810-1817.  
    26-07-2013
  • Cagney N and Balabani S (2013). On multiple manifestations of the second response branch in streamwise vortex-induced vibrations. Aip Publishing Physics of Fluids vol. 25 (7) 
    01-07-2013
  • Panwisawas C, Gebelin J-C and Reed RC (2013). Analysis of the mechanical deformation arising from investment casting of directionally solidified nickel-based superalloys. Sage Publications Materials Science and Technology vol. 29 (7), 843-853.  
    01-07-2013
  • Ji C, Munjiza A, AVITAL E, Ma J and Williams JJR (2013). Direct numerical simulation of sediment entrainment in turbulent channel flow. American Institute of Physics Physics of Fluids vol. 25 (5), 056601-1-056601-20.  
    26-05-2013
  • Wanninayake IB, Dasgupta P, Seneviratne LD and Althoefer K (2013). Air-float Palpation Probe for Tissue Abnormality Identification During Minimally Invasive Surgery. Institute of Electrical and Electronics Engineers (Ieee) Ieee Transactions On Biomedical Engineering vol. 60 (10), 2735-2744.  
    20-05-2013
  • Ahmed MU, AVITAL E and Korakianitis T (2013). Investigation of Improved Aerodynamic Performance of Isolated Airfoils Using CIRCLE Method., Editors: Sadrul Islam AKM, Amin R and Ali M. Elsevier Procedia Engineering vol. 56, 560-567.  
    08-05-2013
  • Paton J, Khatir Z, Thompson H, Kapur N and Toropov V (2013). Thermal energy management in the bread baking industry using a system modelling approach. Applied Thermal Engineering vol. 53 (2), 340-347.  
    02-05-2013
  • Alam MK, Rahim MT, Avital EJ, Islam S, Siddiqui AM and Williams JJR (2013). Solution of the steady thin film flow of non-Newtonian fluid on vertical cylinder using Adomian Decomposition Method. Journal of The Franklin Institute vol. 350 (4), 818-839.  
    01-05-2013
  • Semiletov VA and Karabasov SA (2013). Airfoil flow and noise computation using monotonically integrated large eddy simulation and acoustic analogy: Effect of the grid resolution. J Acoust Soc Am vol. 133 (5) 
    01-05-2013
  • Li M, Hon YC, Korakianitis T and Wen PH (2013). Finite integration method for nonlocal elastic bar under static and dynamic loads. Engineering Analysis With Boundary Elements vol. 37 (5), 842-849.  
    10-04-2013
  • Wen PH and Aliabadi MH (2013). Elastodynamic problems by meshless local integral method: Analytical formulation. Engineering Analysis With Boundary Elements vol. 37 (5), 805-811.  
    08-04-2013
  • Liu T, Fleck NA, Wadley HNG and Deshpande VS (2013). The impact of sand slugs against beams and plates: Coupled discrete particle/finite element simulations. Elsevier Journal of The Mechanics and Physics of Solids vol. 61 (8), 1798-1821.  
    06-04-2013
  • Cagney N and Balabani S (2013). Wake modes of a cylinder undergoing free streamwise vortex-induced vibrations. Elsevier Journal of Fluids and Structures vol. 38, 127-145.  
    01-04-2013
  • Mahmoodi-Kaleibar M, Javanshir I, Asadi K, Afkar A and Paykani A (2013). Optimization of suspension system of off-road vehicle for vehicle performance improvement. Journal of Central South University vol. 20 (4), 902-910.  
    01-04-2013
  • Berci M, Gaskell PH, Hewson RW and Toropov VV (2013). A semi-analytical model for the combined aeroelastic behaviour and gust response of a flexible aerofoil. Journal of Fluids and Structures vol. 38, 3-21.  
    01-04-2013
  • Lam HK, Li H, Deters C, Secco EL, Wurdemann HA and Althoefer K (2013). Control Design for Interval Type-2 Fuzzy Systems Under Imperfect Premise Matching. Institute of Electrical and Electronics Engineers (Ieee) Ieee Transactions On Industrial Electronics vol. 61 (2), 956-968.  
    15-03-2013
  • Nerukh D and Karabasov S (2013). Water-peptide dynamics during conformational transitions. Journal of Physical Chemistry Letters vol. 4 (5), 815-819.  
    07-03-2013
  • Taylor JG, Cutsuridis V, Hartley M, Althoefer K and Nanayakkara T (2013). Observational Learning: Basis, Experimental Results and Models, and Implications for Robotics. Springer Nature Cognitive Computation vol. 5 (3), 340-354.  
    26-02-2013
  • Barras J, Murnane D, Althoefer K, Assi S, Rowe MD, Poplett IJF, Kyriakidou G and Smith JAS (2013). Nitrogen-14 Nuclear Quadrupole Resonance Spectroscopy: A Promising Analytical Methodology for Medicines Authentication and Counterfeit Antimalarial Analysis. American Chemical Society (Acs) Analytical Chemistry vol. 85 (5), 2746-2753.  
    20-02-2013
  • Wen PH and Aliabadi MH (2013). Analytical formulation of meshless local integral equation method. Applied Mathematical Modelling vol. 37 (4), 2115-2126.  
    15-02-2013
  • Ravizza S, Chen J, Atkin JAD, Burke EK and Stewart P (2013). The trade-off between taxi time and fuel consumption in airport ground movement. Springer Nature Public Transport vol. 5 (1-2), 25-40.  
    13-02-2013
  • Khoshravan MR, Khadivi O and Paykani A (2013). Finite element analysis and experimental study of stress distribution in straight frog of railway needle. Journal of Failure Analysis and Prevention vol. 13 (1), 72-79.  
    01-02-2013
  • Karabasov S, Bogey C and Hynes T (2013). An investigation of the mechanisms of sound generation in initially laminar subsonic jets using the Goldstein acoustic analogy. Journal of Fluid Mechanics vol. 714, 24-57.  
    10-01-2013
  • Niemann S, Kolesnikov B, Lohse-Busch H, Hühne C, Querin OM, Toropov VV and Liu D (2013). The use of topology optimisation in the conceptual design of next generation lattice composite aircraft fuselage structures. Aeronautical Journal vol. 117 (1197), 1139-1154.  
    01-01-2013
  • Vu HM, Forth JP, Dao DV and Toropov VV (2013). The use of optimisation for enhancing the development of a novel sustainable masonry unit. Applied Mathematical Modelling 
    01-01-2013
  • Sakulkaew K, Thomas AG and Busfield JJC (2013). The effect of temperature on the tearing of rubber. Polymer Testing vol. 32 (1), 86-93.  
    01-01-2013
  • Lowe DJ, Chapman AV, Cook S and Busfield JJC (2013). Studying NR/organo-montmorillonite nanocomposites with silane coupling agents via network visualization tem. Rubber Chemistry and Technology vol. 86 (4), 538-557.  
    01-01-2013
  • Alam MK, Rahim MT, Avital EJ, Islam S, Siddiqui AM and Williams JJR (2013). Solution of the steady thin film flow of non-Newtonian fluid on vertical cylinder using Adomian Decomposition Method. Journal of The Franklin Institute 
    01-01-2013
  • Hosseini G, Williams JJR, Avital EJ, Munjiza A, Dong X and Green JSA (2013). Simulation of the upper urinary system. Crit Rev Biomed Eng vol. 41 (3), 259-268.  
    01-01-2013
  • Zeng X, Fang QH, Liu YW and Wen PH (2013). Screw dislocations interacting with two asymmetrical interfacial cracks emanating from an elliptical hole. Chinese Physics B vol. 22 (1) 
    01-01-2013
  • Panwisawas C, Mathur H, Gebelin J-C, Putman D, Rae CMF and Reed RC (2013). Prediction of recrystallization in investment cast single-crystal superalloys. Elsevier Acta Materialia vol. 61 (1), 51-66.  
    01-01-2013
  • Khatir Z, Paton J, Thompson H, Kapur N and Toropov V (2013). Optimisation of the energy efficiency of bread-baking ovens using a combined experimental and computational approach. Applied Energy vol. 112, 918-927.  
    01-01-2013
  • AVITAL E, Musafir RE and Korakianitis T (2013). Nonlinear Propagation of Sound Emitted by High Speed Wave Packets., Editors: Lee D, Buckingham MJ, Chiu CS and Wu SF. World Scientific Journal of Computational Acoustics vol. 21 (3), 1-21.  
    01-01-2013
  • Fukahori Y, Hon AA, Jha V and Busfield JJC (2013). MODIFIED GUTH-GOLD EQUATION FOR CARBON BLACK-FILLED RUBBERS. Rubber Chemistry and Technology vol. 86 (2), 218-232.  
    01-01-2013
  • Carpi F and Shaheed H (2013). Grand challenges in magnetic capsule endoscopy. Expert Review of Medical Devices vol. 10 (4), 433-436.  
    01-01-2013
  • Wen PH, Hon YC, Li M and Korakianitis T (2013). Finite integration method for partial differential equations. Applied Mathematical Modelling 
    01-01-2013
  • Fukahori Y, Sakulkaew K and Busfield JJC (2013). Elastic-viscous transition in tear fracture of rubbers. Polymer vol. 54 (7), 1905-1915.  
    01-01-2013
  • Zehsaz M, Torkanpouri KE and Paykani A (2013). Convergence of shape optimization calculations of mechanical components using adaptive biological growth and iterative finite element methods. Journal of Central South University vol. 20 (1), 76-82.  
    01-01-2013
  • Xu S, Jahn W and Müller J-D (2013). CAD-based shape optimisation with CFD using a discrete adjoint. International Journal For Numerical Methods in Fluids 
    01-01-2013
  • Ali MN, Busfield JJC and Rehman IU (2013). Auxetic oesophageal stents: structure and mechanical properties. Journal of Materials Science: Materials in Medicine, 1-27.  
    01-01-2013
  • Sipatov AM, Karabasov SA, Gomzikov LY, Abramchuk TV and Semakov GN (2013). Application of three-dimensional numerical study in air-blast atomizer designing. Institute of Continuous Media Mechanics Computational Continuum Mechanics vol. 6 (3), 346-353.  
    01-01-2013
  • Faranosov GA, Kopiev VF and Karabasov SA (2013). Application of azimuthal decomposition technique for validation of CAA methods. 19th Aiaa/Ceas Aeroacoustics Conference 
    01-01-2013